Kraft Thank You Banner

Hello Friends -

I'm back with another fun project, a banner.

I am hosting another teacher appreciation lunch for the Wonderkid's school.  This one is much smaller, only the seven preschool teachers but I still like to dress-up the room.

Here is a close-up of the leaves in the corners of each pennant.

As you can see, all the edges have been inked.  All of the pattern paper came from a stack from Micheal's.  It is part of their partnership with DCWV.  The name of this lovely stack is Night and Fall. It has some Halloween papers and the rest are this lovely fall motif.  My only frustration, they don't sell the pack of matching solid cardstock.

The pennant and leaf cuts are all from SVGCuts.com.  I love this Serene Leaf set.  There are about a dozen different leaves which I've used over and over again.  I started out cutting the maple leaves in multiple sizes and the oak, aspen and others but then I decided it was too much.  I went back to just the oak leaves in a small size.

The baker's twine is from the Kraft Outlet and can be found here.

I'm entering this in the Kraft Journal Challenge - "thanks".  I actually started this project last week with the intention of entering it in last week's challenge -- "banners" but the week became far too busy and I couldn't pull it together.  I wanted to make something I really liked so I chose not to rush for last week.  I think it was worth the wait.  I recommend checking out some of the other incredible creations at the Kraft Journal.

This is going to be a busy week but I hope to be back to show you some more crafty projects.  I'll be making some of my Christmas cookies which can be stored in the refrigerator until I'm ready to put them in tins.  I also need to get ready for our annual trip to the Colorado mountains.  Well, I just made myself crazy thinking about all I need to do.  Back to the grindstone.

Kraft Journal Bling Challenge and Cooking with Cricut

Before I get into my card, I have tons of Kraft Outlet/Journal news.

First, if you look on the right side of my blog there is something new.  I WON!!! Can you believe it?  I was one of the top three at the Kraft Journal last week.  You can see the card here.  I was so excited and honored to have won.  They had a number of wonderful submissions for the challenge, I especially liked Jan from Chai Tea 'n Me.  And any time I see Laurel from Seabrook Design I know I'll be in for a treat.  You should definitely check out the other entries.

In addition, my order from Kraft Outlet arrived.  I can't wait to start playing with my dictionary pages and library cards and library envelopes.  It is going to be fun.  If you haven't had a chance, check out their cool stuff. 

Now for my card.  The challenge at Kraft Journal is bling and the challenge at Cooking with Cricut (remember this is not a Cricut Cake site, it is paper cutting and they have a ton of cool cuts) is swirly and twirly.  Now, I'm not a huge bling person.  I think it is one of the reasons I like kraft paper so much.  Kraft paper feels more organic and not so formal.  However, I rose to the challenge and channeled my inner princess.

The card base is kraft.  I tried to decide if this would have worked with white or cream cardstock as the base and I came to the conclusion, no.  It really looks best with the kraft.  The pattern paper and the three layers above it are all DCWV's Amber Autumn stack and coordinating cardstock.  I must say, I looked at these papers a number of times and thought I would never use them but I'm very glad I had them. 

Here is a close-up of the cut.  It is from the Martha Stewart Elegant Cakes cart.  Isn't it absolutely wonderful?  I cut it at 4 3/4 inches.  The bottom layer (darkest brown) is a glitter cardstock which cut amazingly well in my Cricut.  The middle layer is the shimmery brown and the top layer is the blue.  All three colors are also in the bottom layered pattern paper.  I can see a number of additional cards in these wonderful Martha Stewart carts.

Then came the bling.  I used my favorite, Creative Charms, gradient gems.  I chose the largest brown gems and the next size down in clear and blue.  What do you think of my bling?

Then, to finish off the card...

I added an 1 1/2 strip to the inside to dress it up just a big. 

Does it look swirly and twirly?  How about bling?  Do you think I got it right?  What would you recommend changing or adding?

Caught a Bug Card

I made this card for Going Buggy's Party.  She is celebrating a ton of stuff, including 500,000 visits.  That is pretty amazing.  I love Enfy's work.  She does a lot of coloring with ProMarkers and she makes some incredible cards, calendars and other cool stuff.  So, when she created a challenge (which is going to be judged which makes me just too nervous to think) I wanted to do something fun and different.

The challenge was to use a bug on the project.  Well, I decided to use a few bugs.  The centipede is from Walk In My Garden.  The other two bugs are from Boys Will Be Boys.  The jar is from Doodlecharms.  I made the jar out of acetate (can you tell I'm on an acetate kick, yesterday it was acetate stencils, today it is an acetate feature.  I cut the jar 5 times.  Once for the shadow, once for the back, once for the lid, once for the top layer and once for the cut out of the bottom.  I thought it gave it a little depth to have the bottom cut out and inked.  Then, I pop dotted the jar away from the shadow. 

I tried to get a picture of the layers but it is tough to see.

I had to be very strategic in where I placed my pop dots so they wouldn't show through the jar.

These are the bugs in the jar. 

The sentiment was computer generated.  It says, "I heard you caught a bug".  Everyone in my family has a low grade cold so we are all just a little miserable but not bad enough to stop and do nothing.  It is no fun at all.

The pattern paper is DCWV from the Songbird stack.

So, what do you think?

Recipe/Photo Album

The idea for this project has been kicking around in my brain for quite some time.  However, I had planned to make it for myself.  In the end it became a present for my youngest brother.  He enjoys cooking, he finds it's a stress reliever similar to how I feel about most cooking. So, I made this for him for Christmas.

 This is the cover of the book.  I planned on using my Bind-It-All for the binding but in the end it was a little over 2 inches thick and no one makes the binding rings large enough.  I then planned to use O-Rings but the largest size you can buy at my Office Depot or Staples is 2 inches.  It was a little tight but I was able to close them.  I'm working on getting 3 inch rings so it will flip easily.

Here is a picture of one of the inside pages.  It is actually an envelope mini-album.  I used these envelopes

The envelope measures 9.5 inches by 6.5 inches.  I have a ton of them around and use them constantly.  They were the perfect size for this project.  It meant each recipe card could be 8.5 inches by 6.45 inches and the pages measured at exactly half of an 8.5  by 11 inch piece of paper.  I slit one side of the envelope, sealed  the top as though I was mailing it and then covered them.

 This is one of the pages with the recipe card pulled out.  I made a frame for the picture using rolling pins found on "From My Kitchen".  The phone is from the same cart.  All of the recipe cards are made using a box from George and welding a tab off of "From My Kitchen".

Here is another page. I used the same rolling pin but this time I used the pie from Paper Dolls (I can't remember if it is Dress Up or Everyday). 

 This is the envelope with the recipe card inside.

 Now pulled out.  You can't read it very well but I used my Cri-Kits and wrote on the frame of this page.  I used the same paper for the frame so it would blend in nicely.  I also used my Cri-Kits to write the name of each recipe on the tab.  I then colored them in using alcohol inks.

 This is the Pumpkin Pie page.  I make the pumpkin "glop" for the pies (not the canned pumpkin filling) that is why it explains which pumpkins to buy when making pumpkin pies.  I had an extra pie so I put it on the recipe card instead of the envelope.  The pie is made using "From My Kitchen" cart.  The pumpkin is from SVGCuts' Heirloom Pumpkins. 

 This is a long recipe so it goes onto the back of the recipe card.

Here is the back of the recipe card and the back of the envelope.

 I thought this was another great page.  The turkey is from Doodlecharms cart.  Again, you can see the recipe card inside the envelope...

and outside the envelope.

Here you can see the pages inside the back cover.  I used almost exclusively DCWV stacks for this project (The Natural, Autumn Splendor and Bon Voyage).  It was wonderful to be able to go to a couple of stacks and find the tons of paper I need for this.  I have used most of my pattern paper from The Natural and Autumn Splendor.  Having the matching cardstock was FANTASTIC.  The one other paper I used is here on the front flap and the inside cover.  It is Tim Holtz's Seasonal stack.  Oh my goodness, I'm absolutely in love with this stack.  He made one page that is all old recipe cards.  It was the most perfect paper for this project.  The only problem, I didn't want to cut the paper.

This is one more picture of the inside of the book.  I used Winter Frolic for the sledder and snow angel.

As I was writing this post, I decided it is tough to follow exactly what I did.  So, I thought I would do a step by step tutorial.
Envelopes/Outside Pages
1.  Get your envelopes and measure them.
2.  Split them on the side you want to insert the recipe cards.  I used the right side.
3.  Seal the envelopes.
4.  Cover the envelope front and back.  I made certain the bottom and right side was even on all of my pages. I knew the top was likely to be inside the bindng so less important to be even. I used my ATG gun to afix everything.  This project used up more than 3 rolls of ATG tape.
5.  Set the envelopes aside.

Recipe Cards
1.  Cut out enough cards for all of your recipes.  I ended up doing 20 recipes.  I used manilla folders (the kind you use for filing) for my pages.  You don't need anything as heavy as chip board but you could use it if you wanted.
2.  Cut out your pattern paper to go over the front and back of your recipe card.  Cut a space the appropriate size to insert your recipe under the pattern paper.  (You could just adhere the recipe to the top of the pattern paper but I thought it looked a little more professional by creating a frame).
3.  Print out your recipes and afix them to the manilla folder.
4.  Afix the pattern paper to the recipes and manilla folder.  Make certain to remember if you have a recipe that continues onto the back side of the recipe card.

Putting the recipe cards and envelopes together.
1.  Decide which cards will go into each envelope.
2.  Add photos and embellishments as your desire.
3.  Place them in your desired order and create a stack with them.  You will need to measure this soon.

Cover
1. Measure the outer edge of your recipe cards inside of the envelopes.  Add enough size to make certain your cover is larger than your pages.  This will allow the cover to protect the tabs of the pages.  You could make this like a traditional word book where you can see each page but I wanted it to have a little more protection. 
2.  Measure the height of the stack of all of the embellished envelopes with their recipe cards inside.
3.  I used two pieces of chip board for each piece of the cover and then added a piece of cardstock around that.  Cut the chip board to size.
4.  Cut the pattern paper 1/2 inch larger than the chip board.  For the back cover, which will have a flap that goes all the way around to the front and clasps, add another 1/2 inch.  This will pattern paper will be the outside cover of the book.
5.  Cut a piece of coordinating paper the exact same size as the chipboard.  This is the inside cover of the book.
6.  Lay out your back cover, large piece, 1/4 inch, piece the height of the book, 1/4 inch, and flap.  My flap was 2 inches which happened to be the same height as the book.  When you adhere the paper to the chipboard, make certain you score it and leave enough room for the book to bend.
7. Choose your closure.  I was very simple and used a small round piece of velcro which I adhered using zip dry.  You could do any number of neat things to keep it closed.  Some of the Tim Holtz closures would be very cool.
8.  Using a Bind-It-All, Crop-o-dile or a hole punch, punch the holes in the cover and all of the pages.  I made certain I removed the recipe cards so they didn't get punched or cut while I was punching the pages.
9.  Assemble.

I hope this tutorial made it easier to understand how I did this.  If you have further questions just leave me a comment and a way to get back in touch with you.  I'm sorry this was so long but I hope it provided some inspiration for you.  Thank you for reading and looking. 

Calendar - Part 2

This is part 2 of my Calendar project.  If you missed the first post, I suggest going back.  It discusses all of the great features of Designer's Calendar.  You can find the post here.

Now, my regular readers know how much I love my carts.  I have lots of them and find them to make things easier for me.  However, I also love my SCAL.  It gives me additional options.  Today I'm going to show a couple of pages I made using SCAL.  I bought some items from SVGCuts and Lettering Delights.  For those people that missed it, Lettering Delights is now selling SVG files ready to cut.  I've been using their clip art and doodlebats and preparing them for cutting myself.

 This page was made from a set called Lights, Camera, Action.  I bought the set over the summer but haven't had a chance to cut it until this week.  I did very little to change it in order to cut.  I took out about half of the lines on the stage and I moved the parts of the mask (already divided) so that I could cut them in different colors.

 Here is a better picture of the stage.  I also cut the lights separately in silver to give it a little bit of texture.  It is very delicate but I thought it made a great frame (even if I had more pictures than it would hold).

Don't you love the masks?  I think they came out fantastic.  This is an example of why I love having SCAL.  It allows me to cut things that Provo Craft isn't likely to ever create.  They have some fantastic things but I love the flexibility of creating things in my imagination.

 I made this page using SVGCuts' Serene Leaves and 3D Fall Cards.  My picture doesn't properly show the the frame on the bottom card.  It has oak leaves going up the side of the card.  The ribbon comes from Ribbon and Bows Oh My.  I purchased one of their Convenience Packs after Okie Ladybug was raving about how great they are.  I must admit, I think she is correct.

This picture didn't come out very good.  It looks like it has the measels but those are actually little leaves.  I love this paper (DCWV Amber Autumn Stack) but it is almost impossible to cut it using my Cricut.  Some of the leaves are glittered, some are embossed and some are a flat imprint.  It makes it gorgeous but it causes so much grief for the cutter.  I ended up cutting this 4 times (twice with a brand new blade) and it still wouldn't cut cleanly.  However, I LOVED all of the matching cardstock.  I think all four or five colors were in the pack.  And even with all of those options I ended up using some of the patterned papers that coordinated for the orange leaves.

Both of these frames came from SVGCuts.  I believe at least one was free (maybe both).  If you are on their email list they email you a link for a free cut file at least once a week and maybe twice.  Many of them are one cut from some of the files they sell.

 The frame on this one is from SVGCuts also.  The paper is from Paper Studio's A Country Christmas.  It has the cardstock and pattern paper in the same stack.  I decided to use some different techniques on this page.  I used Rock Candy Crackle Paint on the snowmen and Glossy Accents on some of the snow flakes to give them a bit of shimmer.  The snowflake brads are also from Paper Studio. 

I used some snowflake stamps to give the white paper a little more interest.  I initially cut the calendar as a test cut but then I decided to use it since it worked. 

I hope you have enjoyed this project.  I was able to finish it in less than a week (I didn't have much of a choice, we were exchanging gifts a couple of days ago) but a few of the pages are lacking because of the speed.  If anyone can help me with a way to share the cut files, I would be happy to load them up and offer them to anyone wanting to make a 2011 calendar.

Enjoy, I'm hoping to be able to post a couple of additional projects before Christmas.

Calendar

I have given away my first large present of the year.  I made a calendar using Designer's Calendar.  In the past I have used one of those programs to make calendars for my family and friends.  You know the ones, it seems everyone in the world offers them. I made mine with Costco but Snapfish and RitzPix and everyone else out there offers them.  My frustration with those calendars is they force you into one of their boxes.  You get a template (maybe a couple) and you must fit your pictures into that template.  Often times I don't want the entire pictures (I never said I was a great photographer, many of my pictures seem to be off center).  Or, I will want a vertical picture with two horizontal pictures and that isn't an option with them.

When I first saw Designer's Calendar I knew I wanted it.  I love the idea of making calendars, they are practical and allow me to display photos.

This cart has some neat features.  It has four fonts (base, script, boxed, circled) and it has a ton of word art (although it seems to be a little American centric -- Columbus Day is one of the pieces of word art).  Because I knew I was going to be cutting out 12 months worth of calendars, I didn't want to mess with each and every day needing to be laid out separate.  Therefore, I used the boxed numbers, months and days and welded them all together.  By doing this, I was able to make a "lace" out of the calendar which I then glued to another piece of cardstock.

Here is the way it looked in Design Studio.  The months are all the same length, I used the same days and copied them to the next month, then I only needed to make certain I started the month on the correct day (and remember which ones have 30 or 31 days).

As you can see, I have hidden the outside of the box going around each number.  The box is blue, not black like the number.  My only frustration with this project came when I wanted to save the calendar.  Because I only hid one contour (the outside of the box) I couldn't save it.  Each time I want to cut one of these, I need to go back and hide the appropriate contours. I tried hiding two contours and copying each number over top of itself so I could hide two contours on each (thus making it possible to save the hidden parts).  On the first two pages where I tried this, it randomly cut different contours.  It was frustrating enough (and I had so little time) that I quit with the idea that I'll go back and figure it out later. 

The base cardstock is Core'dinations, the pattern paper is from a company called Gartner in Minnesota.

The pattern paper is from DCWV's Animal Crackers and the base brown is from Cloud 9. 

Here are three of the months.  I loved the way they looked using patterned paper and a solid paper.  I used paper from more companies than I can name.  The holly paper for December was from Paper Studio which comes with the coordinating cardstock.  Paper Studio is sold by Hobby Lobby.  I bought this stack in July of this year. 

So far, all of the pictures look a bit plain.  It wasn't all that way.  Here are some of the other pages.

I used Core'dinations White Wash cardstock for the shamrocks.  I then put them through my cuttlebug using the Divine Swirls and Dots folders.  I didn't want too much on the page because of all the pictures but I needed something.

 I love this page.  I'm not normally a fan of the pink but I think this came out nice.  I created the strip of hearts in Design Studio using the Love Struck cart.  The large valentine heart is from the same place.  If you are a fan of Design Studio (as I am) I will warn you that the keyword search never finds any of the hearts on this cart.  I don't know why but I have taken to using CricutSearch.com because of this problem, especially.

I used a  K & Company stack for the patterned paper and Core'dinations for the embossed hearts.  I also used buttons from JoAnn's to decorate the empty spot at the top.  I used a technique from Enfys at Going Buggy.  If you haven't had a chance to check out her blog, I highly recommend it. She does some incredible inking and great cards, layouts etc.

 Isn't this a fun page?  I used Walk In My Garden for the flowers and then the other embellishments are from the very wonderful Creative Charms.  I absolutely love their products.  The butterflies, ribbon and jewels are all from Creative Charms.  You can find them here.  I have some of their velvet poppies which are very elegant but I have so much trouble convincing myself to use them.

 Here is a close-up of one of the butterflies, some of my stitching and the ribbon.  I also inked the edge of the flower using my bic markers.  I loved the effect it made by soaking into the paper in different ways.

The cardstock is Core'dinations White Wash and the pattern paper is the Basics from the Paper Studio.  I am normally a huge fan of the Paper Studio but this stack was one of my worst purchases.  None of the colors coordinate with ANYTHING.  They are all just a little bit off.  However, in this situation, I was able to use some of the blue.

 The yellow cardstock is Core'dinations.

I know this page is a bit plain but I'm loving it none the less.  Isn't the owl cute and he matches so nicely.  The pattern paper is from KI Memories' Little Guy stack.  I bought it at JoAnns.  It just goes to show, you can find what you are looking for in some very odd places.  The recipient of the calendar was in a sorority and their mascot was an owl so I added this little guy to this page.

 It is a little plain but fun none the less.  You can't tell from this photo but I embossed the frames using my cuttlebug and the damask folder. The sun and bee came from Create A Critter. 

It is tough to see but the wings on the bee are made using the packaging from one of my carts.  I embossed it using dots.  I think I should have inked it also but I was starting to run out of time and energy.

Tomorrow, I'll show you more pages of this project.  I have some really neat stuff to add but this is getting a bit long.